Technical Specifications - GYS NOMAD POWER PRO TRUCK Mode D'emploi

Translation of the original instructions
For power apply to 12 V vehicle products or 12 V electronics
1. When 12 V electronics/automotive products connected to the cigarette lighter port.
2. Press the switch button
USING AS LED FLASH LIGHT
Press the switch
3
There are 4 modes of LED light appear in order (normal. strobe. SOS. off) if you press slightly.

TECHNICAL SPECIFICATIONS

Dimension: 248 x 248 x 96 mm
Weight: 2230 g
Battery Capacity: 5.3 Ah
Output: 5 V 1 A; 5 V  2.1 A; 12 V  10 A
Input: Quick Charge 5V  2A; 9 V  2 A; 12 V  1,5 A
Full charging time: About 10 hours
Starting current: 12 V / 600 A ; 24 V /600 A
Peakcurrent: 12 V / 1500 A ; 24 V / 1500 A
Operating temperature : -20°C ~ 60°C / - 4°F ~ 140°F
TROUBLESHOOTING
Finding
No response when pressing the
switch button
The output switches off automati-
cally after 1 second.
WARRANTY
The warranty covers faulty workmanship for 1 year from the date of purchase (parts and labour).
The warranty does not cover:
• Transit damage.
• Normal wear of parts (eg. : cables, clamps, etc..).
• Damages due to misuse (power supply error, dropping of equipment, disassembling).
• Environment related failures (pollution, rust, dust).
In case of failure, return the unit to your distributor together with:
- The proof of purchase (receipt etc ...)
- A description of the fault reported
12
NOMAD POWER PRO TRUCK
to power supply.
3
3 seconds to start the LED flash light
Low voltage protection of Jump
Starter is started.
The voltage is too low. The booster
does not detect the battery.
The clamps are not connected properly.
.
12
Cause Remedies
Plug the adaptor into the Quick Charge
input port to activate.
Connect the clamps correctly and
press 12 V / 24 V to start the booster.
EN