Oki PT340 Guide De L'utilisateur page 64

DHCP IP Address Print
1) Select "DHCP IP Address Print" to enter the IP Address Print Mode as shown
below. Wait several tens of seconds.
2) When the IP Address, Subnet Mask, and Default Gateway have been
successfully acquired, the acquired values will be printed out and the Print
Mode will be closed.
3) If the FEED button is pressed while the values are being acquired, the Print
Mode will be immediately closed with the following message printed out:
" DHCP IP Address Print mode finished. "
Please wait...
Acquiring IP address via DHCP.
If you need to finish,
please press FEED button.
Please wait...
Acquiring IP address via DHCP.
If you need to finish,
please press FEED button.
Completed to acquire IP address.
IP Address
Subnet Mask
Default Gateway
DHCP IP Address Print mode finished.
10. 50.138.100
255.255.255.
10. 50.138.
62
0
1