On Screen Navigation - RIDGID microEXPLORER Manuel De L'opérateur

Icons (continued)
Language – Choose between, English, French, Spanish, German,
Dutch, Italian, etc.
Save – Indicates image or video has been saved to memory.

On Screen Navigation

Splash Screen
When the microEXPLORER inspection cam-
era is powered on, the first screen displayed is
referred to as the splash screen. This screen
tells you the device is booting up. Once the
product is fully powered up, the screen will au-
tomatically switch to the live screen.
Figure 11 – Splash Screen
Live Screen
The live screen is where you will do most of
your work. A live image of what the camera
sees is displayed on the screen. You can
pan, zoom, adjust LED brightness and take
images and video from this screen.
Figure 12 – Live Screen
Adjust LED brightness
Pressing the right and left arrow button on
the key pad (In live screen) will increase or
decrease the LED brightness. A brightness
microEXPLORER ™
indicator bar will be displayed on the screen
as you adjust brightness.
Figure 13 – Adjusting LED
Zoom
The microExplorer inspection camera has a
3X digital zoom. Simply press the up and
down arrows while in the live screen to zoom
in or out. A zoom indicator bar will be dis-
played on the screen as you adjust your
zoom.
Figure 14 – Adjusting Zoom
Entering the Primary Settings Screen
Pressing the select button
screen will take you to the primary settings
screen.
Press the back button
you back to the live screen.
Primary Settings Screen
The icons in the dashed box can be con-
trolled from the Primary Settings Screen
(Figure 15) .
Ridge Tool Company
Digital Inspection Camera
at any point to take
while in the live
11