Installation And Use - Niko 05-350 Mode D'emploi

05-350 / 05-338

2. INSTALLATION AND USE

Range between Easywave transmitters and receivers
Equipment using a remote control, such as TV, video and audio, does not suffer interference from
the Easywave transmitters. The Easywave transmitters need not be pointed at the receiver. The
range in buildings amounts to approx. 30m. In open fields ranges of up to 100m are possible.
The transmitter range depends upon the materials used in the building.
You may also use diagnostic unit 05-370 to determine the RF signal strength in a given
environment. The device detects all 868,3MHz signals. The reception quality of the transmitter
signal or the strength of the interfering signals present is indicated by 9 LEDs, allowing you to
determine whether the RF transmitter's range is sufficient.
brick, concrete wood, plaster walls reinforced concrete enclosure in metal
loss: 20 to 40 % loss: 5 to 20 % loss: 40 to 90 % loss: 90 to 100 %
EN 41