ALPHA-TOOLS ASS 150 Mode D'emploi page 5

Masquer les pouces Voir aussi pour ASS 150:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 6
Anleitung ASS 150
06.09.2005
Wear goggles!
Wear a breathing mask!
15:43 Uhr
Seite 5
Note!
Always wear safety goggles and a
dust mask.
Always keep the dust extraction holes
in the vibrating plate free of dirt or
other obstructions.
Vibration measured according ISO
5349.
Special acessories
Sandpaper
Grain
Packed in Art. no.
units of
40, coarse
10
60, medium
10
100, fine
10
In order to take full advantage of your
vibrating grinder, always use original
special accessories, available at all
hardware shops.
Attaching sandpaper
– Remove the plug from the mains
supply.
– Insert the end of the sandpaper and
close the clamping mechanism.
– Draw the sandpaper tigth over the
vibrating plate and clamp the other
end.
– Ensure that the holes match with the
vibrating plate.
Maintenance
– Always keep your vibrating grinder
clean.
– Do not use caustic cleaning agents
to clean the plastic housing.
– Check the carbon brushes is an
excessive amount of sparks is gene-
rated when working.
– Always keep the dust extraction
holes in the vibrating plate free of
dirt or other obstructions.
– Water must never come into contact
with the machine.
GB
44.602.00
44.602.01
44.602.02
5

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

44.604.99

Table des Matières