Clock Setting; Alarm Setting - SOUNDMASTER URD860 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 22

CLOCK SETTING

Clock setting only available in standby mode
1. Press and hold the SET button until the system entered the clock setting mode.
2. System will enter the 12/24 hour setting & Display will flash "24H" .
3. Press "
" or "
4. Press SET button once to confirm & enter the next setting.
5. Repeat step 3&4 to complete minutes & hour setting.

ALARM SETTING

Before setting the alarm, please make sure the clock setting is completed.
1. Short Press the "
2. Press "
" or "
3. Press "
" or "
4. Repeat step 2 & 3 to set the
• Minute
• Sound source (Buzze/Radio/CD/USB)
• Volume
1. To cancel the Alarm, please press "
2. Press "
" or "
show on display again for review.
3. To change the alarm setting, please press and hold "
alarm setting mode again.
SNOOZE
When the alarm has been activated. You may press the "
another 9 minutes. After delay alarm 6 times, the alarm will automatic disable.
SLEEP
In any operation mode, press the SLEEP button to set the desired sleep time
(90>80>70>...20>10>OFF>).
AUTO OFF
This product is equipped with an auto power-save function. In the CD/MP3/USB/AUX-IN mode, if the
unit remains in STOP or PAUSE or no sound output for more than 10 minutes it will automatically
switch off, please press POWER
OTHER OPERATION
" to select the desire hour format.
" or "
" button once to enter alarm setting mode.
" button to select the desire Hour.
" to confirm.
" again to active the alarm with the previous alarm setting, all the setting will
button to re-active the unit.
" or "
" button until the alarm icon disappear.
" or "
SNOOZE
" button until the unit entered the
" button to delay the alarm for

Publicité

Table des Matières
loading

Table des Matières