Time And Calendar Manual Setting; Alarm Setting - SOUNDMASTER FUR4005 Mode D'emploi

FUR4005 / English Instruction Manual

TIME AND CALENDAR MANUAL SETTING

Setting Time and Calendar
Press SET/MEM/M+ (7) button in standby mode and keep depress over 2 seconds to enter time
set mode, after enter the setting mode, press SET/MEM/M+ button (7) to change the mode
cycle as follows:
Normal → Year → Month → Day → 12/24 H format → Real time Hour → Real time Min →
Normal
Action (during data adjustment):
- Press << / Tune - button (3) to adjust data backward.
- Press >> / Tune + button (4) to adjust data forward.
- Keep depressed << or >> button for 2 seconds to enable auto forward.
- Use SET/MEM/M+ (7) button to confirm each setting.

ALARM SETTING

Setting Alarm 1 and Alarm 2
Press the alarm set button (5/6) during normal mode to show the alarm time. Afterwards keep
depress the alarm set button (5/6) over 2 seconds to enter the alarm set mode. After enter the
setting mode, press the alarm set button (5/6) to change the mode cycle as follows :
Normal → AL 1 Hour → AL 1 Min → AL 1 weekday Alarm → AL 1 wake beep → AL 1 wake
radio → AL 1 wake radio volume →Normal.
Normal → AL 2 Hour → AL 2 Min → AL 2 weekday Alarm → AL 2 wake beep → AL 2 wake
radio → AL 2 wake radio volume →Normal.
Select alarm weekday mode as follows:
1-5: Monday to Friday
1-7: Whole week
6-7: Saturday & Sunday
1-1: One day of week
ACTION (DURING DATA ADJUSTMENT):
- Press << / Tune - (3) button to adjust data backward.
- Press >> / Tune + (4) button to adjust data forward.
- Keep depressed << or >> button for 2 seconds to enable auto forward.
- Use ALARM 1 / ALARM 2 set button to confirm each setting.
ALARM
Beep alarm or radio alarm will ring for 30 minutes if no key is pressed, then it will stop
automatically and wait for same alarm time on next day.
Enable / disable the Alarm
Press and hold the "ALARM 1" (5) / "ALARM 2" (6) button to enable or disable the alarm. Once
the alarm is activated, the bell symbol will be appeared on the display.
3