Power Fist 8974289 Manuel D'utilisateur page 5

V4.0
110-120 V~ Grounded Tools: Tools with Three Prong Plugs
1. In the event of a malfunction or breakdown, grounding provides a path of
least resistance for electric current to reduce the risk of electric shock. This
tool is equipped with an electric cord having an equipment-grounding
conductor and a grounding plug. The plug must be plugged into a matching
outlet that is properly installed and grounded in accordance with all local
codes and ordinances.
2. Do not modify the plug provided – if it will not fit the outlet, have the proper
outlet installed by a qualified electrician.
3. Improper connection of the equipment-grounding conductor can result in a
risk of electric shock. The conductor with insulation having an outer surface
that is green with or without yellow stripes is the equipment-grounding
conductor. If repair or replacement of the electric cord or plug is necessary,
do not connect the equipment grounding conductor to a live terminal.
4. Check with a qualified electrician or service personnel if the grounding
instructions are not completely understood, or if in doubt as to whether the
tool is properly grounded.
5. Use only 3-wire extension cords that have 3-prong grounding plugs and 3-
pole receptacles that accept the tool's plug.
6. Repair or replace damaged or worn cord immediately.
7. This tool is intended for use on a circuit that has an outlet that looks like the
one illustrated above in 125 V~ 3-Prong Plug and Outlet. The tool has a
grounding plug that looks like the plug illustrated above in 125 V~ 3-Prong
Plug and Outlet.
8. The outlet must be properly installed and grounded in accordance with all
codes and ordinances.
9. Do not use an adapter to connect this tool to a different outlet.
Visit www.princessauto.com for more information
1 in. Belt Sander 8974289
5