Grounding Instructions - Power Fist 8974289 Manuel D'utilisateur

8974289
10. Wear proper apparel. Do not wear loose clothing, gloves, neckties, rings,
bracelets, or other jewelry which may get caught in moving parts. Nonslip
footwear is recommended. Wear protective hair covering to contain long
hair.
11. Always use safety glasses. Also use face or dust mask if sanding operation
is dusty. Everyday eyeglasses only have impact resistant lenses, they are
not safety glasses.
12. Don't overreach. Keep proper footing and balance at all times.
13. Maintain tools with care. Keep tools clean for best and safest performance.
Follow instructions for lubricating and changing accessories.
14. Disconnect tools before servicing; when changing accessories, such as
belts.
15. Reduce the risk of unintentional starting. Make sure switch is in off position
before plugging in.
16. Use recommended accessories. Consult the owner's manual for
recommended accessories. The use of improper accessories may cause
risk of injury to persons.
17. Never stand on tool. Serious injury could occur if the tool is tipped or if the
belt is unintentionally contacted.
18. Check damaged parts. Before further use of the tool, a guard or other part
that is damaged should be carefully checked to determine that it will operate
properly and perform its intended function – check for alignment of moving
parts, binding of moving parts, breakage of parts, mounting, and any other
conditions that may affect its operation. A guard or other part that is
damaged should be properly repaired or replaced.
19. Direction of feed. Feed work into a belt against the direction of rotation of
the belt only.
20. Never leave tool running unattended. Turn power off. Don't leave tool until it
comes to a complete stop.

GROUNDING INSTRUCTIONS

DANGER! To prevent electric shock and death from incorrect grounding wire
connection read and follow these instructions:
4
1 in. Belt Sander
For technical questions call 1-800-665-8685
V4.0