ENGLISH
20
5
Clean the coffee exit duct thoroughly with a spoon handle or
another round-tipped kitchen utensil.
6
Rinse the outside of the brewing unit with lukewarm water.
Never use any washing-up liquid or other cleaning agent to clean the
brewing unit.
Do not dry the brewing unit with a cloth to prevent fibres from
collecting inside the brewing unit. After rinsing, just shake excess water
off the brewing unit and let it air-dry.
7
Before you slide the brewing unit back into the machine, make sure
the two reference signs on the side match. If they do not match,
perform the following step:
-
Make sure the lever is in contact with the base of the brewing unit.
8
Make sure the locking hook of the brewing unit is in the correct
position.
-
To position the hook correctly, push it upwards until it is in uppermost
position.