Using an Optional Conversion Lenses
The conversion lenses listed below can be used with this camera. Before you use a conversion lens,
make sure that the zoom is set to TELE or WIDE, whichever is required.
3x Extension Lens Tele 300 Pro
1.45x Tele Extension Lens Pro
0.8x Wide Extension Lens Pro
to size of approx. 49mm x 37mm
To select the conversion lens mode (not close-up shooting)
Press and hold down the macro button
conversion lens mark
mark will blink. Otherwise the mark will not blink.
To set up close-up shooting with a conversion lens
Set the mode dial to setup/connection
mode menu, select the macro mode/conversion lens mark
22
Conversion Lens
Type
TCON-300
f=420mm equivalent
Filter diameter 49mm
Fully Multi-Coated
TCON-14B
f=200mm equivalent
Filter diameter 86mm
Fully Multi-Coated
WCON-08B
f=28mm equivalent
Filter diameter 105mm
Fully Multi-Coated
Macro Extension Lens Pro
MCON-35
f2 - f2.4
Possible to shoot area up
Filter diameter 72mm
Fully Multi-Coated
, and then turn the main dial or sub dial until you see the
in the control panel. If a 3x Extension Lens Tele 300 Pro is attached, the
, and then press the menu button. In the Setup/connection
Attachment
Setting
Method
f2.8
Support
arm
f2.4
Screw
f2
Screw
Screw
WIDE - TELE
Zoom
Control Panel
Display
TELE
blinking
TELE
WIDE
displayed
.