Product Description - Chauvet DJ FXpar 9 Manuel De Référence

Product Description

The FXpar 9 is a compact LED effect par with built-in infrared technology that offers easily controllable static colors and
automated programs with the optional IRC-6 remote. Combine three types of LED technology with 9 quad-color LEDs, 21
white SMD LEDs, and 1 high power tri-color COB LED. Control the outer ring, the SMD strobes, and the center LED
separately for spectacular dynamic effects.
Overview
LED Display
Menu
Buttons
Power Out
Fuse
Holder
Power In
Fan
AC Power
This product has an auto-ranging power supply that works with an input voltage range of 100 to 240 VAC, 50/60 Hz.
To eliminate wear and improve its lifespan, during periods of non-use completely disconnect the
product from power via breaker or by unplugging it.
Power Linking
For the maximum number of FXpar 9 products that you can power link at each voltage, see the User Manual or the sticker
on the product.
Fuse Replacement
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and replace with a fuse of the exact same
type and rating.
5. Re-insert the fuse holder and reconnect power.
FXpar 9 QRG Rev. 6
QUICK REFERENCE GUIDE
Microphone
DMX In/Out
Sensitivity
Knob
Safety
Loop
Infrared Sensor
COB LED
SMD
Strobes
Quad LEDs
EN
2