Product Description - Chauvet DJ COLORband PiX USB Manuel De Référence

COLORband PiX USB QRG
Product
Description
Product
Overview
AC Power
Power Linking
Fuse
Replacement
Mounting
Product
Mounting
Diagram
The COLORband PiX USB is a full-size LED strip light with individual zone control
for pixel mapping effects. Built-in infrared technology offers easily controllable static
colors and automated programs with the optional IRC-6 remote. DMX control
wirelessly with the convenient built in D-Fi USB port. Twelve high-power, tri-color
LEDs nearly eliminate multicolored shadows and the smooth and even output makes it
perfect as a blinder or a wash light.
Safety Loop Fuse Holder
Power In
WARNING! DO NOT plug anything other than a D-Fi USB into the USB port.
Doing so may cause damage to the product.
This product has an auto-ranging power supply that can work with an input voltage
range of 100 to 240 VAC, 50/60 Hz.
To eliminate wear and improve its lifespan, during periods of non-use completely
disconnect from power via breaker or by unplugging it.
For the maximum number of COLORband PiX USB products that you can power link
at each voltage, see the User Manual or the sticker on the product.
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and replace
with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
Before mounting this product, read the
Mounting Clamp
(such as the CLP-15N
from Chauvet)
Mounting
Bracket
Bracket Adjustment Knob
Microphone
Power Out Menu Buttons
Safety Notes.
3
LED Display D-Fi USB Port
DMX In/Out
Safety Cable
(such as CH-05
from Chauvet)
EN