Utilities - Belkin F1UP0002 Mode D'emploi

Web Management
1
Auto –
DHCP server. "Auto" means that the Print Server will first
2
search for and detect DHCP servers within the network
automatically. If a DHCP server exists on the network, the
3
internal DHCP server will stay idle (disabled) and would not
respond back to DHCP requests that it receives from clients.
If a DHCP server doesn' t exist on the network, the Print
4
Server will turn on its own internal DHCP server and assign
IP addresses to clients. In this case, the internal DHCP server
will also assign the first IP address to the Print Server only
5
if the static IP option is not selected on this page, as static
IP takes precedence. Fill in the "Starting Address", "Range",
6
"Subnet Mask", "Gateway", and "DNS" fields; then the Print
Server will assign a unique IP address to each DHCP client.
7
Note:
"Save Changes" to save the settings and restart the system.
8

Utilities

9
Load Factory Defaults
10
This page allows the user to restore factory defaults on the Print
Server by erasing all the previous configurations.
11
12
13
14
15
16
17
There is another option called "Auto" for the internal
After configuring the Print Server, you have to click
78