Belkin F1UP0002 Mode D'emploi page 59

Print Server Manager
Ad-Hoc Mode:
In the Ad-Hoc mode, you can allow the Print Server to automatically
associate with another wireless station, or you can manually assign
the SSID of your wireless network. You can allow the Print Server
to automatically select the channel that is the same as the wireless
station with which you want to connect, or you can manually assign a
channel.
If you select to
allow the Print
Server to scan
for an active
wireless station,
the following
window will pop
up
The list shows
the scanned
active wireless
stations. Select a
wireless station
from the list and
click "Next". If you cannot find the wireless station with which you
want the Print Server to communicate, click "Scan" to allow the Print
Server to scan again.
59 59
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17