JB Systems COB-PLANO Mode D'emploi page 10

Masquer les pouces Voir aussi pour COB-PLANO:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11
ENGLISH
 The mains cables must be in impeccable condition and should be replaced immediately when even a
small problem is detected.
 In order to protect the device from overheat the cooling fans (if any) and ventilation openings should be
cleaned monthly.
 The interior of the device should be cleaned annually using a vacuum cleaner or air-jet.
 The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to
optimize light output. Cleaning frequency depends on the environment in which the fixture operates: damp,
smoky or particularly dirty surroundings can cause greater accumulation of dirt on the unit's optics.
 Clean with a soft cloth using normal glass cleaning products.
 Always dry the parts carefully.
Attention: We strongly recommend internal cleaning to be carried out by qualified personnel!
SPECIFICATIONS
Mains Input:
Power consumption:
Fuse:
Power linking (IEC in / out):
Sound Control:
DMX connections:
DMX modes:
LED Source:
Beam angle without lens:
Beam angle with lens:
Size:
Weight:
You can download the latest version of this user manual on our website: www.jb-systems.eu
JB SYSTEMS
®
100-240Vac, 50/60Hz
40 Watt
250V 1A slow blow (20mm glass)
max. linking load = 10A
Internal microphone
XLR 3pin
3, 4 and 6 DMX Channels
36W COB LED
±100°
±15°
See drawing 208x120x221mm
2 kg
Every information is subject to change without prior notice
8/51
USER MANUAL
COB PLANO

Publicité

Table des Matières
loading

Table des Matières