Resetting Controller - Velux integra active KRX 100 Guide De Démarrage Rapide

Resetting controller

the controller can be reset to its initial factory settings
if you want to delete all registered sensors, sunscreening
products and all programming and start afresh.
1
Remove the back cover of the controller.
the adaptor must remain connected to mains supply.
2
Press the button on the right side of the controller with a
pointed object for at least 5 seconds.
3
Replace the back cover.
4
Press "Yes" to confirm that you want to reset the
controller.
5
the display shows that all sensors, products and pro-
grams will be deleted in the controller.
Press "Continue" to complete the resetting.
the controller has now been reset. to reinstate the con-
nection between controller, sunscreening products and
sensors, please refer to the instructions in section Initial
set-up.
42 VELUX
inFoRmation
the controller
will be reset.
Continue?
Yes
inFoRmation
all sensors/
products/programs
will be deleted
in the controller
Continue
ENGLISH
No
Back
ENGLISH
VELUX 43