Identifying Sensors - Velux integra active KRX 100 Guide De Démarrage Rapide

Identifying sensors

to benefit the most from the program VELUX ACtiVE,
it is important that the sunscreening products are as-
signed to the correct solar sensor.
the example shows how to identify solar sensor No. 1.
1
Press "Menu".
2
Scroll through the menus:
Program settings sensor settings
3
Press to highlight "Solar sensor".
Press "Enter" to confirm your choice.
4
the display shows a list of all solar sensors registered in
the controller.
5
Press briefly.
the display shows that the sensor must be prepared for
identification. this is done by pressing the button at the
bottom of the sensor with a pointed object for max
5 seconds.
32 VELUX
12 : 32
25°C
Menu
sensoR tyPe
temp. sensor
solar sensor
Enter
P1
solaR sensoR
no. 1
no. 2
Enter
P1
inFoRmation
Prepare sensor
for identification.
Press button
on sensor
P1
ENGLISH
6
the display shows that the sensor has been identified.
if the display shown does not appear, the solar sensor in
question has not been identified. Repeat item 5 until the
display shows that the sensor has been identified.
Disable
Back
P2
Back
P2
Back
P2
inFoRmation
solar sensor
P1
ENGLISH
no. 1
identified
Back
P2
VELUX 33