Program Settings - Velux integra active KRX 100 Guide De Démarrage Rapide

34 VELUX
ENGLISH

Program settings

the program VELUX ACtiVE can be set to fit the building and the user's
needs.
there are four different settings:
• Additional sunscreening products (sensor settings)
How to assign additional sunscreening products to the sensors or undo your
assignment. this setting is used for instance when assigning a new roller
shutter to the solar sensor.
• Interrupting the program VELUX ACTIVE in user-set periods of time
(Timetable)
How to set the program to run or stop for a user-set period of time on all
weekdays and/or on both days over the weekend. this might be useful for
instance if you want the program to run at night.
• Sunscreening without complete darkness (Ambient daylight)
How to set sunscreening products to close only 90% to let some light into
the room.
• Glass units with solar protective coating (Pane factor)
How to optimise the program's adjustment to the sunscreening products
by taking into consideration the heat absorbing properties of the insulating
glass unit.
However, this only applies to roof windows with insulating glass units
57G/57FG, 60G or 76G/76FG (the glass unit variant appears from the
window data plate).
X X X X X X X X X X
ENGLISH
www.velux.com
VELUX 35