Installing The Camera; Laying The Cables - Abus TVHD60000 Manuel Utilisateur

6.2 Installing the camera

IMPORTANT!
The camera must be disconnected from the power supply during installation.
Place the camera in a suitable location
and use the wall plugs and screws
provided to affix the camera in place.

6.3 Laying the cables

There are two methods for laying the cables.
Concealed installation
A concealed installation of the connecting cable involves drilling a hole with the corresponding
diameter through the installation point. The connecting cable is then guided through the hole, and
the camera mount is used to cover the cable bushing.
Surface installation
For visible installation of the connecting cable on a surface, the cable opening in the camera mount
must be removed using a suitable pair of pliers. The cable opening is situated at the side of the
camera mount base plate.
27