Before Use; Unpacking; Assembly; Use - Dirt Devil CARGO Swirl Y50 Mode D'emploi

3 Before use

3

3.1 Unpacking

Before use
ATTENTION:
Always transport or ship the appliance in its original packaging to avoid
damage. Keep the packaging for such an event. However, dispose of
no-longer-needed packaging material properly.

3.2 Assembly

A
2
A
3
* *
1 2
4
2
1
5
*optional (*i. e. in the scope of delivery depending on model and features)
12
B
B
*
3
*
4
*
*
3
1. Unpack the appliance and all its accessories.
2. Check that the contents are intact (Fig. 1).
NOTE:
Immediately contact your dealer if you have found damage resulting
from transport.
WARNING:
Danger of injury! Only attach the nozzles if the appliance is not con-
nected to the power supply. The cylinder vacuum cleaner could be
switched on by accident.
1. Insert the suction hose adapter powerfully into the suction hose recep-
tacle (Fig. 2/A).
2. Lock the suction hose adapter to the appliance by turning it powerfully
clockwise (Fig. 2/B) until it can be turned no further.
3. Push the handle into the telescopic tube (Fig. 3/A).
4. Adjust the length of the telescopic tube. Press down the release catch
on the telescopic tube to do this (Fig. 3/B). Then extend the telescopic
tube to the desired length. Let go of the release catch while pulling until
it locks in place. You will hear a distinct click.
5. Select the nozzle according to the surface to be cleaned:
„
The following are included in the scope of delivery:
- Floor nozzle (Fig. 5/1): It can be used everywhere and, thanks to its
switch, can be used equally well on carpets and hard floors.
„
Optionally available* (*i. e. included in the scope of delivery depend-
ing on model and features) are also:
- Crevice nozzle (Fig. 4/1*): Use it to vacuum dust from hard to reach
places.
- 2-in-1 combi nozzle (Fig. 4/2*) is used as a:
- Furniture brush (Fig. 4/2*):
Use this to vacuum dust off objects that have sensitive surfaces.
- Upholstery nozzle (Fig. 4/3*): By simply pulling off the collar brush
(Fig. 4/4*) you can transform the 2-in-1 combi brush into a uphol-
stery nozzle (Fig. 4/3*). Use this to clean soft, scratch-resistant sur-
faces (e.g. upholstered furniture).
- Parquet brush (Fig. 5/2*): Its long bristles make it especially suitable
for cleaning delicate surfaces (e.g. parquet and laminate floors).
- Turbo brush (Fig. 5/3*): is used to vacuum non-sensitive carpets,
runners, mats, and the like.
- Mini turbo brush (Fig. 4/5*): is used to vacuum non-sensitive uphol-
stery, runners, mats, and the like.
*
5
ATTENTION:
Our (mini) turbo brush can only be used to vacuum surfaces that
are not sensitive. Do not clean any floors or objects with the (mini)
turbo brush that you would not clean without a second thought with a
conventional brush. Therefore, do not clean sensitive or polished floor
surfaces with the (mini) turbo brush. Nor should you clean furniture, sen-
sitive carpets, upholstery, covers, or any material with a sensitive texture
with the (mini) turbo brush. If in doubt, refrain from using the (mini) turbo
brush. In every instance, observe the instructions for care and cleaning
of the respective manufacturer.
6. Push the nozzle chosen onto the lower end of the telescopic tube
(Fig. 5). You can also put the small nozzles directly on the handle
(Fig. 5).
7. Keep the other nozzles safe and inaccessible to children.
4

Use