Using The Metronome; Setting The Tempo And Time Signa - Korg TM-50 Manuel D'utilisation

Using the metronome

Setting the tempo and time
signature
1.
Press the METRONOME ON button.
The pendulum of the metronome will ap-
pear on the display and "
" will appear above it.
2.
Press the TEMPO p or q button to set
the tempo.
Press and hold the TEMPO p and q
buttons simultaneously for 1 second to
switch between Pendulum Step (pendu-
lum of a mechanical metronome) and Full
Step. If Pendulum Step is selected, " "
will appear on the display.
After selecting "PENDULUM STEP" or
"FULL STEP", press the TEMPO p, q
buttons to set the tempo. This setting is
remembered even when the power is off.
If you've selected "PENDULUM STEP"
Pressing the TEMPO p or q button will
increase or decrease the tempo value by 1
step. The value will change continuously if
you hold down the button.
30 n 32 n 34 ... 88 n 92 n 96 ... 232 n 240 n
252 n 30 ...
If you've selected "FULL STEP"
Pressing the TEMPO p or q button will
increase or decrease the tempo value by 1
step. The value will change continuously
if you hold down the button.
30 n 31 n 32 ... 250 n 251 n 252 n 30 ...
3.
Press the START/STOP button to start
the metronome.
The metronome pendulum will swing
from left to right according to the tempo
and the TAP TEMPO button will blink
according to the tempo also.
13