Technical Support - Kensington PowerSled Guide De Démarrage Rapide

• In the USA and Canada: This mark
PowerSled can be recycled by the Rechargeable Battery
Recovery Corporation ("RBRC"). When you are ready to
dispose of the PowerSled, please contact the RBRC at
1-800-8-BATTERY or www.rbrc.org.
Common Troubleshooting Steps
1. Un-plug and re-plug all connections.
2. Charge the PowerSled battery.
3. The power that is available from USB ports differs depending
on their design. For the fastest recharge time, use a USB
port from a AC-USB adapter. Alternately connect the battery
pack to a USB port which is located on your PC or laptop. Do
not recharge using an auxiliary USB port on a keyboard or
extension cable.
Registering Your Kensington Product
Register your Kensington product online at www.kensington.com.

Technical Support

Technical support is available to all registered users of Kensington
products. Technical Support contact information can be found
on the back page of this manual.
Web Support
You may find the answer to your problem in the Frequently
Asked Questions (FAQ) section of the Support area on the
Kensington Website: www.support.kensington.com.
Telephone Support
There is no charge for technical support except long-distance
charges where applicable. Please visit www.kensington.com
for telephone support hours. In Europe, technical support is
available by telephone Monday to Friday 09:00 to 21:00 (Central
European time).
Please note the following when calling support:
• Call from a phone where you have access to your device.
• Be prepared to provide the following information:
– Name, address, and telephone number
indicates your
8
– Name of the Kensington product
– Make and model of your computer
– System software and version
– Symptoms of the problem and what led to them
FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE
STATEMENT
This device has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses. and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment causes harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
MODIFICATIONS: Modifications not expressly approved by Kensington may void the
user's authority to operate the device under FCC regulations and must not be made.
SHIELDED CABLES: In order to meet FCC requirements, all connections to equipment
using a Kensington input device should be made using only the shielded cables.
FCC DECLARATION OF CONFORMITY COMPLIANCE STATEMENT
This product complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation. As defined in Section 2.909 of the FCC Rules, the
responsible party for this device is Kensington Computer Product Group, 333 Twin
Dolphin Drive, Redwood Shores, CA 94065,USA.
INDUSTRY CANADA CONFORMITY STATEMENT
Operation is subject to the following two conditions: (1) This device may not cause
interference, and (2) This device must accept any interference, including interference
that may cause undesired operation of the device.
This Class [B] digital apparatus complies with Canadian ICES-003.
CE DECLARATION OF CONFORMITY
Kensington declares that this product is in compliance with the essential
requirements and other relevant provisions of applicable EC directives. For Europe,
a copy of the Declaration of Conformity for this product may be obtained by clicking
on the Compliance Documentation link at www.support.kensington.com.
INFORMATION FOR EU MEMBER-STATES ONLY
The use of the symbol indicates that this product may not be treated as
household waste. By ensuring this product is disposed of correctly, you will
help prevent potential negative consequences for the environment and
human health, which could otherwise be caused by inappropriate waste
handling of this product. For more detailed information about recycling of
9