Kensington PowerSled Guide De Démarrage Rapide page 4

WARNING! IMPORTANT SAFETY INSTRUCTIONS
Failure to read and follow these safety instructions
could result in fire, explosion, electrical shock or other
hazard, causing serious and/or fatal injury and/or
property damage.
• Do not modify, disassemble, open, drop, crush, puncture, or
shred the Kensington PowerSled Battery for iPhone (which
will be known as the PowerSled for the remainder of this
instruction guide).
• The PowerSled contains a lithium-polymer battery, which is
flammable. Keep away from open flame.
• To prevent short circuit or other potential hazards, prevent
metal objects such as coins or keys from coming into contact
with the PowerSled, and do not insert foreign objects into
the PowerSled or its ports.
• Keep your PowerSled dry, and do not use with wet hands.
Moisture in or on the PowerSled may lead to electrical shock.
If exposed to moisture during use, unplug the PowerSled
immediately. If your PowerSleevegets wet, have a qualified
technician evaluate the product's safety before resuming
use.
• Your PowerSled may become warm during operation. This
is normal. However, to prevent overheating, keep area
around PowerSled ventilated and do not place anything on
or around PowerSled during operation. Do not operate your
PowerSled near a heat source, heat vent, or in direct sunlight.
Your PowerSled should be used in temperatures between
50–80°F (10–27°C).
• If the PowerSled begins to swell or expand, emits a strong
odor, or becomes hot to the touch, discontinue use of the
PowerSled, and have the product examined by a qualified
electronic technician.
• Inspect your PowerSled and cables for damage before use.
Have any damaged part repaired or replaced before use.
• Your PowerSled is not user serviceable. Do not attempt to
open, modify, or repair.
English
6
• If the battery inside the PowerSled leaks for any reason,
discontinue use, and do not allow the PowerSled's contents
to contact your skin or eyes. In the event of accidental
contact wash the affected area with large amounts of water
and seek medical attention immediately.
• Your PowerSled is not a toy. Keep them away from children.
Insure that all persons who use this product read and follow
these warnings and instructions.
• Do not leave the PowerSled on prolonged charge when not
in use.
Enhancing Performance by Proper Care and Storage
of your PowerSled
• Do not store your PowerSled either fully charged or
discharged. It is best to store your PowerSled with at least
30 % charge remaining. To check the charge level of your
PowerSled connect it to a power source with a USB cable.
Check that the battery status indicator LED is green .
• Avoid frequent full discharges because this puts additional
strain on the battery in the PowerSled. Charge your
PowerSled between uses even if it is not fully discharged.
The lithium-polymer battery used in this product has no
"memory effect." Therefore, several partial discharges with
frequent recharges are better than one full discharge, and
will help prolong the life of your PowerSled. Short battery
life in laptops is mainly caused by heat, rather than charge/
discharge patterns.
• Do not store your PowerSled at elevated temperatures (such
as in your car) or in high humidity.
Disposing of your PowerSled
• Do not incinerate or dispose of your PowerSled in a fire or
microwave.
• Do not dispose of your PowerSled as ordinary refuse, as
it contains a lithiumpolymer battery. Consult your local
municipal or civil authority for instructions on correctly
disposing of a lithium-polymer battery.
7