Technical Support - Kensington Charge and Sync Cabinet Guide D'instructions

Daisy Chain Connection
1 Arrange the units in order on a secure surface.
2 Place configured iPad devices in the slots, connect the dock connector cable to the iPads
and USB ports. Push Sync switch button to "ON", LED light will appear in red.
3 Connect all units together by USB cable and USB port located on the back side of the
unit. Connect your master laptop or Mac to the USB port. iTunes will automatically
detect the new searched device name.
NOTE: Adding a new iPad device to the station after the sync button has been activated will
require the sync button to be reset. Push the sync button off, and then on again to reset.

Technical Support

Technical support is available to all registered users of Kensington products. Technical
Support contact information can be found on the back page of this manual.
Web Support
You may find the answer to your problem in the Frequently Asked Questions (FAQ) section
of the Support area on the Kensington Website: www.support.kensington.com.
Telephone Support
There is no charge for technical support except long-distance charges where applicable.
Please visit www.kensington.com for telephone support hours. In Europe, technical support
is available by telephone Monday to Friday 09:00 to 21:00 (Central European time).
13