Practical Considerations When Taking A Temperature; How To Measure A Temperature; Constraints; Functions - VISIOMED ThermoFlash LX-26E Manuel D'utilisation

ficiency, speed and comfort of taking a temperature from this area make
it ideal compared with other temperature measurements methods.

Practical considerations when taking a temperature

- In order to ensure that precise and accurate temperature measu-
rements are obtained, it is essential that each user has received
adequate information on and training in the temperature
measurement technique when using such a device.
- It is essential to remember that although procedures such as
taking a temperature may be simple they must not be trivialised.
- Temperature should be taken in a neutral context. The patient must
not have undertaken vigorous physical activity prior to taking his/
her temperature and the room temperature must be moderate.
- Be aware of physiological variations in temperature which must
be taken into consideration when evaluating the results: tem-
perature increases by 0.5C° between 6am and 3pm. Women
have a temperature that is higher, on average, by around 0.2C°.
Their temperature also varies in accordance with their ovarian
cycle. It rises by 0.5C° in the second half of the cycle and at the
early stages of pregnancy.
- When sitting, temperature is lower by about 0.3° to 0.4°C than
when standing.

How to measure a temperature

SEE SCHEMA A PAGE 2.
Aim at the FOREHEAD, over the right temporal region, from a
distance of about 5cm, press the thermometer's measurement
button and the temperature is instantly displayed.
The reliability of the measurement cannot be guaran-
teed if the temperature is measured over another part of
the body (e.g. arm, torso...).

Constraints

Please observe the following before any temperature measure-
ment to ensure a stable and reliable result:
- Push back hair from the forehead.
- Wipe away any perspiration from the forehead.
- Avoid any drafts (e.g. from nasal specs, air conditioning...).
- The thermometer cannot be used as long as the display screen
is not switched off.
- Each time there is a significant change in the ambient tempera-
ture due to a change in environment, to allow the ThermoFlash®
LX-26 EVOLUTION to acclimatise to this ambient temperature
for at least 15 minutes before using it.
20 Visiomed - LX-26E - UK - 092014
IV. FUNCTIONS
1. Specially designed to take the body temperature of a person
regardless of the room temperature.
2. Sound alarm if temperature is exceeded.
3. Memorization of the 32 last measures.
4. LCD back-lighted digital screen.
5. Data displayed in Celsius or Fahrenheit.
6. Automatic stop (energy saver).
7. Small, convenient, easy to use.
Additional uses
The ThermoFlash® LX-26 EVOLUTION can also be used to measure
the temperature of a baby-bottle or bath, or room temperature (by
using the Surface Temp or Room function).
V. DESCRIPTION OF THE THERMOFLASH® LX-26 EVOLUTION
SEE SCHEMA PAGE 2.
B
1 LCD screen 2 Infrared lens
4 Setting keys 5 Measuring key
VI. STARTING UP YOUR THERMOFLASH® LX-26 EVOLUTION
1. Install battery.
2. For the first use or when inserting new batteries wait between
10 minutes for the warm-up of the apparatus and when inser-
ting the new batteries.
3. Aim towards the forehead (SEE SCHEMA
distance of 5 cm (2 in), press the measuring key, the tempera-
ture is displayed in 1 second. The temperature can also be
taken behind the ear lobe.
4. Before taking the temperature, make sure to remove hair and
perspiration from the forehead.
5. Replace new battery when you see the lower battery logo
.
VII. SETTINGS
1. Choosing the temperature mode
The ThermoFlash® LX-26 EVOLUTION is specially designed to meas-
ure body temperature without contact, of children or adults. It can be
used by consumers in household environment and doctors in clinic as
reference. For this, use the BODY mode.
Measurement range for BODY mode: 32°C – 42.9°C (90°F – 109°F).
Note : You can also use the ThermoFlash® LX-26 EVOLUTION to measure
the temperature of an area or an object, food, a liquid or a room tempera-
Visiomed - LX-26E - UK - 092014
3 Infrared probe
6 Battery case
A PAGE 2), from a
21