Step 11 Level Dishwasher - GE Monogram ZBD6800 Instructions D'installation

STEP 11
LEVEL DISHWASHER
IMPORTANT
for proper dish rack operation and wash performance.
• Place level on door
and rack track inside
the tub as shown to
check that the
dishwasher is level.
Figure W
Installation Instructions
Dishwasher must be level
—
Check
Level
Front
to Back
• Level the
dishwasher by
adjusting the
four leveling legs
individually.
• Make sure 1/2"
minimum gap is
maintained (see
Figure V).
• If adjustment to the right rear leveling leg is required,
gain access by loosening junction box bracket screw
(through the access hole) and rotate bracket
Check
clockwise.
Level
Side
TIP: Pull lower rack out, about halfway. Check to
To Side
be sure the rack does not roll forward or back into
dishwasher. If the rack rolls in either direction, the
dishwasher must be leveled again.
• If the door hits the tub, the dishwasher is not installed
correctly. Adjust leveling legs to align door to tub.
11
Access Hole
Turn Legs
to Adjust
Figure X