VWR VAPOUR-Line eco 25 Manuel D'instructions page 11

• "Service" - This menu is for maintenance authorised personnel only. The parameters stored in this menu can
only be displayed but not modified
Sub menu "Printer"
▲ P R
▼
From this menu it is possible to enable or disable the printer plus set two different printing intervals for the
sterilisation and heating/cooling phases. Press the ENTER button from the "PRINTER" menu; the workflow is
as follows:
If the printer is enabled the "PRINTER ON" LED on the control panel will be lit.
Printing intervals can be set from a minimum of 1 minute up to a maximum of 30 minutes with a 1 minute step.
Sub menu "Delay"
▲
▼
From this menu it is possible to set a delayed start for the sterilisation cycle. From the "DELAY" screen press
the ENTER button:
I N T E R
D E L A Y
0 0 : 0 0
11