Cortex DMIX-600 Manuel D'utilisation page 22

Using the DMIX-600
Cue Points & Memorization
Fig 6.1 - Pressing CUE to return to 0:00:00.
Setting and Memorizing Cue Points
With the DMIX-600, creating and memorizing cue points is
quick and easy.
By default, when there is no Cue Point set (or memorized),
pressing the Cue button returns the unit to the beginning of
the track (0:00.00) and pauses.
To set a Cue Point during playback at a time of your choice, simply press
Pause, and then use the Navigation keypad left & right buttons or Jog
Wheel to make any adjustments by frame. When Play is pressed to
resume playback, the Cue Point will be stored.
+
Fig 6.2 - Cue Point Memorization using Shift+Cue
To memorize the Cue Point and save it to the USB storage device (to be
recalled each time the track is loaded), find the exact frame that you wish
to set as a Cue Point, and press Shift+Cue. This will permanently set &
save the Cue Point to the storage device. This process can also be done
on the fly, without the unit being paused. The screen will indicate when a
Cue Point has been stored.
To advance back to the set Cue Point, simply press the Cue button during
playback. Do not press Pause first, as this will instead set a new point.
Once advanced to the Cue Point, the unit will remain in Pause mode.
To memorize a new Cue Point, you do not have to erase the previously set
one. You can simply press Shift+Cue again, and it will replace the old Cue
Point.
Please note that in order for a Cue Point to be saved to the connected USB
storage device, it must be a FAT32 file system.
+
Fig 6.3 - Cue Point Deletion using Shift+Cue
2s
To erase the saved Cue Point completely, hold Shift and press Cue for two
seconds, until the screen indicates that the Cue Point has been deleted.
20