Selecting Devices & Database Creation - Cortex DMIX-600 Manuel D'utilisation

STEP ONE - DEVICE SELECTION
When prompted, select the desired storage device, on each side,that you
wish to access. Use the Navigator Keypad to advance through the list of
devices, and press Enter to select.
If necessary, you can also connect other USB storage devices without
powering down the unit.
Note that when you select a storage device on one side, the unit will be
required to complete any necessary Database Creation before being
able to select a device on the opposite side.
During this time, the opposite screen will display
"Wait for other side."
STEP TWO - INDEXING
Once you have selected a device,
the unit will search for a database
of the music that exists on that
device. If it is the first time you are using that particular unit with the
DMIX-600, the unit will prompt you to perform indexing, so that you can
search for any song within seconds. If you already have used the stor-
age device with the DMIX-600, skip to STEP TWO - VERIFICATION.
If you wish to create the database using the DMIX-600, select 'YES' from
this prompt.
During the indexing procedure, the unit must create a database based
off of the ID3 tags that exist on the storage device. The speed of this
procedure directly relates to how many songs are stored on the connect-
ed device. If you are using a hard drive over 20 gigs, or an NTFS
device, we suggest that you use the Cortex Database Creation PC appli-
cation to perform the indexing, as it will save time (especially with a fast
CPU). The Cortex Database Creation software is available for FREE
from http://www.cortex-pro.com.
Once the indexing procedure has begun, it can be cancelled by pressing
the Info button.
VERIFICATION
If your storage device has already been indexed, you will be presented
with a prompt allowing you to verify the database. For each time that
you add files to your storage device, you will either have to use the
Verify function to add those files to the index, or use the Cortex
Database Creation PC application.
We strongly suggest using the Database Creation application, as it can
process files at many times the speed of the DMIX-600 itself.
Once the verification procedure has begun, it can be cancelled by press-
ing the Info button.
Once you are finished with verifying, simply choose the option labeled
'Exit from Verify.'
Congratulations! You are now ready to start searching through your
music library quickly and efficiently. Using this method will help you
locate any song in your collection quicker than ever before.
Selecting Devices & Database Creation
Fig 2.2 - Create Database by selecting 'YES'
Fig 2.4 - Everytime music is added to your storage device, the data-
base must be verified and updated in order to index the new songs.
Fig 2.6 - Welcome screen shows unit is ready for use
Using the DMIX-600
Fig 2.1 - Select USB device
Fig 2.3 - Database Creation Screen
Fig 2.5 -Exit Verify
11