MSI MEG X570S ACE MAX Mode D'emploi page 38

9. Insert the card into the PCI_E2 slot.
10. Use a screw to secure the card.
11. Connect the PCIE_PWR1 to the power supply.
12. Connect the case's HDD LED cable to the JCASE connector.
13. Using the supplied HDD LED cable to connect the JMB connector and JFP1's HDD
pins (pin 1 & pin3).
14. Using the supplied JSMB cable to connect the JSMB connector on the card and
JSMB1 connector on the motherboard. And then you can set the fan duty cycle and
the LED color of the card in BIOS.
26
Overview of Components
10
PCI_E2
11
PCIE_PWR1
JCASE
JMB
JSMB
9
12
+
+
14
JFP1
2
1
13
HDD LED
JSMB1