Thermador Professional Serie Installation page 8

Clearance requirements with a Low
Backguard (purchased separately)
1 3 1 3
" "
( 3 3 ( 3 3
0 ) 0 )
as defined in the "National Fuel Gas Code" (ANSI Z223.1, Current Edition). Clearances from non-combustible materials are not part of the ANSI Z21.1
scope and are not certified by CSA. Clearances of less than 6'' (152 mm) should be approved by the local codes and/or by the local authority having
jurisdiction.
Page. 7
inches (mm)