Programming The « Standby » Time Delay - Orion OREL Notice D'installation Et D'utilisation

7.10- Programming the « Standby » time delay
Only transmitters equipped with «On/Off» button allow the
user to view or to modify the duration of the «Standby»
function temporization.
„ This procedure is realized by the transmitter with buttons
«On/Off» button.
„ The receiver does not need to be powered up
B1
Va
«On/Off»
Button
Simultaneously press and hold buttons
on the transmitter; keep the three buttons pressed for 1 second, then release the 3
buttons.
1
Va and
programming choice (this waiting time lasts 4 seconds, after, the transmitter switches
itself off).
B2
Press
Vb LED indicates the current duration :
1 flash, off, 1 flash etc... = 4mn
2
2 flashes, off, 2 flashes etc... = 15mn
3 flashes, off, 3 flashes etc... = 60mn
4 flashes, off, 4 flashes etc... = infinite time (function is deactivated)
Only on OREV and OREL transmitters :
5 flashes, off, 5 flashes etc... = 30s
B2
Press
3
duration..
Once the desired duration is selected, press the «on/off» button to validate your
4
choice. The transmitter saves the changing.
FR
- 98 -
B1 B2
B3 B4
Vb
+ -
électronique
Vb transmitter LEDs come on steady,The transmitter is waiting for a
button to enter in «Standby function time» mode
to modify the duration, each pressure on the button increments the
EN DE
B1
B2
«On/Off»
Button
Va
B1
and
B1 B2
B3 B4
électronique
B2
then press the «On/Off» button
Orion - 324501J
, and
B1 B2
B2
Vb
B2
B1
B4
B3
B6
B5
électronique
B1 B2
B3 B4
B5 B6
B7 B8
électronique