Default Configuration On Delivery; Instructions Before Use; Orion Transmitters Delivery Configuration - Orion OREL Notice D'installation Et D'utilisation

4 - Default configuration on delivery

4.1- Instructions before use

The Orion transmitters and receivers are supplied with certain
parameters pre-set in factory to allow immediate use of the
equipment.
However, it is indispensable to customise these settings
to ensure the uniqueness of your installation and to familiarise
yourself with the complete range of functions provided by the
Orion series (see chapter «Product

4.2- Orion transmitters delivery configuration

Identity code
(internal DIP-switch)
Group of identity codes
Radio channel (1)
Radio power (2)
« Standby » function (3)
(1) = The programming of another radio channel number can only be done with a
transmitter equipped with an «On/Off» button.
(2) = The radio transmission power can be modified with all Orion transmitters.
(3) = Automatic shutdown of remote control, only available with a transmitter
equipped with an «On/Off» button.
Orion - 324501J
configuration»).
ON - ON - ON - ON - ON - ON - ON - ON
ON
ON
OFF
1 2 3 4 5 6 7 8
01
Channel nb.17 (434,700 MHz)
Level nb.3
4 mn
DE EN FR
- 67 -