1- Reading The Current Receiver Radio Channel - Orion OREL Notice D'installation Et D'utilisation

7.8.1- Reading the current receiver radio channel

„ The reading of the receiver radio channel number is done from the
receiver by
ORRA
ORRS ORRD
V3
See list of available radio frequencies (radio channels) in appendix H
ORRS and ORRA receivers : Switch off the receiver
1
ORRD receiver : the receiver can remain powered up throughout the procedure
ORRS and ORRA receivers : install the jumpers
the settings.
ORRD receiver : set the microswitches
ORRS
2
30 31 32 33 34 35 36 37
V1 V2 V3
JP1 JP2
R1 R2
R13 R14
ORRS and ORRA receivers : Switch on the receiver
3
ORRD receiver : go to the next step
V2
number.
V2
4
V3
Example :
V2
number is «06» (433.600MHz).
ORRS and ORRA receivers : switch off the receiver and remove the
5
ORRD receiver : set the
FR
- 96 -
and
LEDs.
JP3
R3 R4
R15 R16
ORRA
and V3 ORRS ORRD
(red) indicates the tens, «ON» = 10, «OFF» = 0
ORRA
ORRS ORRD
(green) indicates the units by flashing.
«OFF», and V3
.jumpers.
EN DE
jumper/microswitch and
ORRA
JP1 JP2
V1 V2 V3
LEDs indicate the current receiver radio channel
ORRA
ORRS ORRD flashing 6 times, the current radio channel
and microswitches to the «OFF» position
and
and to the «ON» position
ORRD
JP1
JP2
JP3
Orion - 324501J
and
V2
to configure
OFF ON
JP3
JP4
V1 V3 V2
and