Orion OREL Notice D'installation Et D'utilisation page 95

See list of available radio frequencies (channels) in appendix H
1
Switch OFF the transmitter (
2
Switch ON the receiver
Simultaneously press and hold buttons
on the transmitter; keep the three buttons pressed for 1 second, then release the 3
buttons.
3
Va and
programming choice (this waiting time lasts 4 seconds, after, the transmitter switches
itself off).
B1
Press
Va and
Va red LED indicates the tens («On» = 10, «Off» =0),
4
the units by flashing.
Example :
times etc... the current radio channel number is «17» (434.700MHz)
5
B1
Press to increment the radio channel number (01 to 18)
Once the desired channel is selected, press the «on/of» button to validate your choice.
Briefly pressing «On/Off» button (<1s) :
the transmitter sends the selected radio channel number to the receiver and saves
its new working radio channel.
6
By pressing and holding the «On/Off» button (during 3 seconds) :
(This procedure should be performed when you are not familiar with the
initial working channel of the receiver)
he transmitter sends the selected channel number to the receiver on each of
the radio link channels (01 to 18), and both equipment save the change. The
procedure is finished when
Orion - 324501J
Vb transmitter LEDs come on steady,The transmitter is waiting for a
button to enter in «radio channel changing» mode
Vb indicate the transmitter current radio channel.
Va is light on, and
Vb green LED goes OFF).
B1
and
Vb flashes 7 times, goes off, then flashes 7
Va and Vb
DE
B2
then press the «On/Off» button
Vb green led indicates
go off (around 10s).
EN FR
- 95 -