Modification Of Radio Power - Orion OREL Notice D'installation Et D'utilisation

7.9- Modification of radio power

It is the user's responsibility to adjust the radio transmit power
to limit or adapt the range in accordance with the application
and the desired endurance.
The average range in open space depends on the environment conditions,
the position of the reception antenna and the orientation of the transmitter,
but is relative as indicated below :
Radio power
„ The procedure for modification and look-up of the radio transmit power is
performed on the transmitter using buttons
S1.
„ The receiver does not need to be powered up
S1
1
Open the housing of the OREV transmitter
2
Press button S1 ; the Va and Vb indicator lights flash alternately
Press function button B2 to enter the « modify/look-up radio transmit power» mode :
The radio power level currently used by the OREV transmitter is replicated by the green Vb
3
indicator light (number of flashes from 1 to 5).
The value of the radio transmit power level is incremented by 1 each time button B1 is
pressed.
Validate the radio power level by pressing button B2 (or by pressing the « On/Off » button
4
if used).
5
Close the housing of the OREV transmitter
Orion - 324501J
Level 5
Level 4
Level 3
Level 2
Level 1
+
ON
1 2 3 4 5 6 7 8
+
Average range
B1
B1 B2
B3 B4
Va
+ -
électronique
DE
200 m
150 m
100 m
70 m
45 m
, and internal button
B1 B2
B2
Vb
EN FR
- 97 -