4- Particularity Of Orrd Receiver On Din Rail - Orion OREL Notice D'installation Et D'utilisation

6.3.4- Particularity of ORRD receiver on DIN rail

The ORRD receiver mounted on DIN rail has
an «RM/R3» relay whose function is selected
using the programming microswitch
This relay can take the «RM» relay function
(see chapter Operation of «RM»
the control relay No. 3 function «R3».
Position of
- When microswitch
is considered as a «RM» relay..
- When microswitch
becomes the third function relay «R3» with operation and programming
similar to that of relays R1 and R2.
Microswitch JP4 position
OFF
JP1
JP2
JP3
JP4
V1
OFF
JP1
JP2
JP3
JP4
V1
Note :
The program settings for relay R3 are saved in the event that microswitch
JP4
is set to the «OFF» position.
FR
- 76 -
JP4 et comportement du relais «RM/R3» :
JP4
JP4
JP4
ON
on
OFF
V3 V2
JP4
ON
on
ON
V3 V2
EN DE
JP4
.
relay) or
is set to the «OFF» position, the «RM/R3» relay
is set to the «ON» position, the «RM/R3» relay
«RM/R3» relay function
«Power supply» connection
«RM/R3» relay
connection
OFF ON
JP1
JP2
JP3
Microswitch «JP4»
JP4
V1 V3 V2
«R1» relay
connection
«R2» relay
connection
«RM» relay
«R3» relay
Orion - 324501J