Technical Specifications; Troubleshooting / Solutions - Hozelock Green Power XL Mode D'emploi

weeds will wither and be destroyed in
2 to 3 days.
The residue may then be removed
and composted.
Note: several treatments may be
necessary for stubborn and tenacious
weeds.
nt
Before stopping the device
s
completely, a cooling phase is
required.
Set the switch (4) to the "Ventilation"
position (Fig2C). Ventilation must last
s
30 seconds minimum.
Once this operation is complete, you
can set the switch to OFF (Fig2A) to
tem
switch off the GREEN POWER XL.
Using as a charcoal bbq lighter
t
Equiped with the round nozzle, this
device can be used to light charcoal
barbecues. Comply with the barbecue
manufacturer's instructions.
y
To light the charcoal, put the
FF'
charcoal in the barbecue as usual
R
and bring the nozzle up to within a
e
few centimetres from the charcoal.
g
Make sure that the device is suitably
positioned and stable directed at the
t
centre of the barbecue. Set the device
to "heat" (Fig2B). Leave the device in
the same position until the charcoal
starts to glow. This may take between
30 seconds and 2 minutes depending
on the charcoal. When the charcoal
s
is sufficiently hot, it becomes red and
flames may appear near the nozzle.
This indicates that the charcoal is lit.
to
Unplug the device before removing it
from the fire. Allow the device to cool
down before putting it away (see next
paragraph). Do not let the hot parts
n
of the device to touch the power cord
ed
or other inflammable materials.
y
n
Check the device is completely cold
before storing it.
The device can be laid on the ground
Stopping the device
Storage
on its carrier (7) or hung to the wall by
its anchoring point (2).

TECHNICAL SPECIFICATIONS

Power
Voltage
Temperature at nozzle outlet,
approx.
Supply cord
Protection rating
Insulation class

TROUBLESHOOTING / SOLUTIONS

Incidents
a- The device 1- No power
does not heat. supply.
2- The switch
(4) is not in the
heating position.
b- The plant does 1- The device is
not fade. not set properly
on the ground.
2- The
application time
is not long
enough.
For any other anomaly, please call our after-sales service.
For safety purposes, only HOZELOCK's after-sales service is
authorized to disassemble the electrical weeder.
WARRANTY
This product has a 2-years warranty against any material
or manufacturing defect, from the date of purchase of the
device by the user, upon presentation of the purchase invoice
or cashier receipt only. This warranty consists in repairing the
faulty device.
Our warranty excludes:
- unauthorized disassembly of the device,
- wear parts,
- modified equipment,
- equipment used against the recommendations described in
these instructions,
- equipment abused,
- degradations due to careless use: shock, drop...
Our warranty does not cover accidents resulting from the
damage or faulty and abnormal use of the equipment.
The legal warranty for conformity defects and redhibitory
vice applies according to the conditions of articles 1641 to
1649 of the French Civil Code.
5
2000 watt
220V-240V 50Hz
600°C
1,5 m – H05 RNF
IPX0
Class 2
Causes Solutions
1- Check that the
plug is properly
inserted into the
socket.
2- Set the
switch (4) to the
'heating' position.
1- Apply the
nozzle properly
to the weed while
letting rest on the
ground.
2- Depending
the plants
size, it could
be necessary
to increase
the treatment
duration until the
plant wilt.