shark SPARTAN RS Manuel D'utilisation page 5

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

justing the helmet. Should this not
be the case, the selected helmet
is too big, try the next smaller size
(see Figure B).
3. With the chin strap fastened,
grab the back of the helmet by its
base and try to remove it from your
head by a rotational movement.
Next, try to remove the helmet by
grabbing it at the base of the chin
guard. You must perform these mo-
vements in expending a sufficient
amount of effort. If the helmet
starts to loosen, then the selected
helmet is too big, hence try the next
smaller size.
4. Lean your head forward as much
as possible. The base of the chin
guard must not touch your chest
(see Figure C).
5. Now lean your head backward as
much as possible. The base of the
helmet must not touch your back
(see Figure D).
Avoid bunching or attaching your
hair inside the helmet.
Do not place anything in or on your
C
hair inside the helmet. Avoid adding
anything inside the helmet to adjust
its position on your head.
For questions regarding choosing
the right helmet size, please seek
advice from your retailer.
Each of these steps needs to be re-
peated throughout the helmet use
life since the cushiony foam may
alter over time. Should the foam no
longer be sufficiently thick when
wearing the helmet, it will need to
be replaced.
WARNING!
your helmet without first
verifying, in accordance with
instructions laid out in this ma-
nual, that it fits the other person
snugly.
WARNING! If in following
these
instructions,
helmet you identify is not per-
fectly suitable, DO NOT WEAR
IT. Instead, choose a different
size or model.
Never
lend
the
D
5

Publicité

Table des Matières
loading

Table des Matières