Loading; Shutdown And Restart; Shutdown; Vzdrževanje, Servis In Popravila - Daikin AHT CB 124 Traduction De La Notice Originale

AHT Cooling Systems GmbH | en
CAUTION
Breakage of glass containers.
Hand and body cuts.
§ Wear protective gloves to remove split
glass parts and goods that may have been
damaged as a result.
§ Carefully and completely remove all split
glass parts and damaged goods.
Leakage of liquids from damaged
packaging.
Slipping hazard.
§ Check for puddles in front of and under
the appliance.
§ Promptly remove leaking liquids.
NOTICE
Material damage due to misuse.
§ Operate the appliance in a stable operating posi-
tion (horizontal alignment).
§ Operate the appliance only on the designated ad-
justable feet.
§ Read the installation notes [see } Chapter 8].
§ Check that the appliance is in good, proper condi-
tion. Any damage must be repaired immediately.
Property damage due to misuse.
§ Do not operate the appliance above the climate
class stated on the rating plate
[see } Chapter 3.2.1].
§ The ambient temperature must not fall below 16°C
(60.8°F).
§ Observe the prescribed storage temperature of the
stored products.
§ Check the interior temperature
[see } Chapter 5.1].
§ In the event of a power failure, stored goods must
be checked by the operating company (temperat-
ure check).
§ Check the area in which goods are placed for for-
eign objects. Remove goods stored incorrectly im-
mediately.
§ Remove food and packaging residues
[see } Chapter 11.1.1].
10.1

Loading

Goods are removed from the front.
CAUTION
Material breakage.
Falling hazard. Impact hazard due to falling
parts/goods. Cuts.
§ When loading, do not climb onto or into
the appliance.
440031_1_0321
Falling objects.
Impact injury. Cuts in the event of glass
breakage.
§ Do not set down any objects on the appli-
ance.
§ Observe maximum loads of any type of
storage rack [see } Chapter 3.2].
§ Carefully add goods.
NOTICE
Property damage due to misuse.
§ Only add goods to the appliance once the spe-
cified temperature for the product has been
reached.
§ Adhere to loading specifications.
§ Carefully add goods.
§ Do not block the night blind by loading with goods.
The night blind must be able to close completely.
Loading specification
– Loading of the bottom shelf is only permitted up to
the end of the return air grille.
Fig. 18: Loading limit (1) Return air grille (2)
– Do not cover the return air grille with goods.
– Do not allow goods to protrude over the edge of
the display shelf.
10.2

Shutdown and restart

WARNING
Work on the electrical system.
Contact with live parts may result in electric
shock.
§ Only qualified staff may carry out work on
the electrical system.
§ Observe the electrical safety rules prior to
commencing work.
1. Disconnect the appliance.
2. Secure the appliance against reconnec-
tion.

10.2.1 Shutdown

Reasons for shutdown by qualified staff
– Maintenance, service, repair [see } Chapter 11.2]
– Main cleaning [see } Chapter 11.1.2]
Reasons for shutdown by operating personnel
– Damage to appliance
Operation | 10
1
2
43 / 220