Rating Plate And Serial Number; Use As Intended; Information Requirements (Eu) 2019/2024, 2019/2015; Structure And Function - Daikin AHT CB 124 Traduction De La Notice Originale

AHT Cooling Systems GmbH | en
3.2.1

Rating plate and serial number

Observe the information on the rating plate.
The rating plate is a sticker located at the top right in-
side the appliance.
– Appliance name and type
– Serial number
– Climate class*
– Rated voltage and frequency
– Rate current and consumption
– Refrigerant and quantity used
– Net content
– Date of manufacture
– and further technical data
*Examples of climate classes:
Climate class Ambient tem-
(class) accord- perature [°C]
ing to ISO
23953-2
3
3.3

Use as intended

The appliance is intended for the display of packaged,
refrigerated food products or access to them by cus-
tomers.
More information [see } Chapter 2.2]
3.4 Information requirements
(EU) 2019/2024, 2019/2015
The following information is provided in compliance
with the information requirements of Regulation (EU)
2019/2024 Annex II.3:
a)
The temperature of the appliance is set at the factory
to ensure compliance with the M-package temperature
class specified by the manufacturer. To ensure optimal
storage of the food, it is recommended that you main-
tain this setting.
b)
Changes in the temperature settings can lead to spoil-
age of the food.
c) Requirement does not apply to this appliance
d) Requirement does not apply to this appliance
e)
– [see } Chapter 8]
– [see } Chapter 11.2]
– [see } Chapter 11]
f)
If the condenser coil is not cleaned once per year, this
can considerably reduce the efficiency of the appli-
ance.
g, h, i, j, k)
– [see } Chapter 11.2.5]
440031_1_0321
Relative humid-
ity [%]
25 60
The following information is provided in compliance
with the information requirements of Regulation (EU)
2019/2015 Annex V.2:
This product contains a light source of energy effi-
ciency class F.
4

Structure and function

The appliance is a compact device ready to plug in.
The appliance is pre-programmed ex works.
The appliance contains one or more hermetically
sealed refrigerant circuits whose components are per-
manently and technically tightly connected to each
other.
The design of the individual appliance models may
vary.
The appliance is equipped with a night blind.
Fig. 1: Night blind
The appliance is equipped with display shelves.
Display shelves can be expanded, reduced or reposi-
tioned.
Changes to the number of display shelves by agree-
ment with the manufacturer only.
The appliance is equipped with a return air grille
[see } Chapter 10.1].
6
5
Fig. 2: Overall view of appliance – CB 196
1 Air duct baffles
3 Bottom shelf
Water protection
5
strips
Appliance group
An appliance group consists of two individual appli-
ances.
Structure and function | 4
1
1
2
3
4
2 Display shelf
Operating elements
4
and display indicators
6 Return air grille
35 / 220