Finishing; Minimum Combustible Mantel Clearances - Napoleon XIR4-1N Instructions D'installation Et D'opération

4.0 FINISHING

IF FINISHING THE FRONT OF THE APPLIANCE, IT MUST BE FINISHED WITH ANY NON-
COMBUSTIBLE MATERIAL SUCH AS BRICK, MARBLE, GRANITE, ETC.
DO NOT STRIKE, SLAM OR SCRATCH GLASS. DO NOT OPERATE APPLIANCE WITH GLASS
FACING AND/OR FINISHING MATERIAL MUST NEVER OVERHANG INTO THE APPLIANCE OPENING.
4.1

MINIMUM COMBUSTIBLE MANTEL CLEARANCES

RISK OF FIRE, MAINTAIN ALL SPECIFIED AIR SPACE CLEARANCES TO COMBUSTIBLES. FAILURE
TO COMPLY WITH THESE INSTRUCTIONS MAY CAUSE A FIRE OR CAUSE THE APPLIANCE TO
OVERHEAT. ENSURE ALL CLEARANCES (I.E. BACK, SIDE, TOP, VENT, MANTEL, FRONT, ETC.) ARE
WHEN USING PAINT OR LACQUER TO FINISH THE MANTEL, THE PAINT OR LACQUER MUST BE
Combustible mantel clearance can vary according to the mantel depth. Use the graph to help evaluate the
clearance needed. These same requirements apply to any combustibles protruding on either side of the
appliance.
MANTEL DIMENSIONS
Ref
M H
A E
N I
T G
E H
L T
0" (mm)
NEVER OBSTRUCT THE FRONT OPENING OF THE APPLIANCE.
REMOVED, CRACKED, BROKEN OR SCRATCHED.
CLEARLY MAINTAINED.
HEAT RESISTANT TO PREVENT DISCOLOURATION.
A 17" (43.2cm)
B
16" (40.6cm)
C 15" (38.1cm)
D
14" (35.6cm)
E
6" (152mm)
F
5" (127mm)
G
4" (102mm)
H 3" (76mm)
A
B
C
D
H G
F
MANTEL DEPTH
WARNING
!
RISK OF FIRE!
WARNING
!
6" (152mm) MANTEL
E
72.1B
73.1
F
G
H
A
B
C
D
24 / " (61.6cm)
1
4
W415-1344 / A / 12.14.16
11
EN