Return To The Root Directory Of The Cd; Displaying Cd Text; Displaying Title (Mp3/Wma); Ejecting The Disc - Fujitsu Ten Eclipse CD4000 Manuel D'utilisation

Operation
Return to the root directory of
the CD
In the root directory, when a file cannot replay,
the system will return to the first file that can
perform a replay. (In the configuration example,
the file is returning to 001.mp3. see page 17.)
1
Press the [RTN] button.

Displaying CD text

Only this CD player supports CD TEXT. It can not
be displayed with the optional CD changer. If the
CD came with a logo shown below, it is recorded
with a disc title and track titles. These information
will be displayed during playback.
Press the [DISP] button for more
1
than one second.
Pressing the [DISP] button while text is
displayed scrolls the display in the
order DISC title ➔ TRACK title, and
then the display stops with the TRACK
title.
CD TEXT recorded with characters
other than alphanumeric and symbols
cannot be displayed.
22

Displaying title (MP3/WMA)

Press the [DISP] button for more
1
than one second.
Each time the button is pressed, the
following will be displayed in order.
Folder Name/File Name* ➔ Folder No.
/File No. ➔ Tag
*:The display
maximum of 9 characters and then
scrolls to display the remaining
characters.
After the folder name is displayed,
the file name will be displayed by
scrolling. After the file name is
scrolled, the display will be fixed.
ATTENTION
Folder name/file name or tag recorded with
characters other than alphanumeric and
symbols cannot be displayed.

Ejecting the disc

1
Press the [CD
The front panel opens and the disc is
ejected.
Remove the disc and press the
2
[CD ] button.
The front panel closes.
CAUTION
• Do not drive with the front panel open.
The panel may cause unexpected
personal injury during a panic stop or
abrupt changes of vehicle motion.
• Do not attempt to close the front panel
by hand. Doing so may damage the
panel.
area shows a
] button.