Quickjack 3500SLX Manuel page 19

Air and Hydraulic Cylinders
Each QuickJack Frame has one Air Cylinder and one Hydraulic Cylinder.
The components of the Air and Hydraulic Cylinders are:
• Air Inflation Valve. Used to add air pressure to the Air Cylinder. Comes with the appropriate
valve (also called a Schrader® valve) installed.
• Hydraulic Cylinder Connector. Hydraulic Elbow Fitting attaches here. Use a 6 mm hex key to
remove the shipping plug before installing the Hydraulic Elbow Fitting.
• Bleeder Screw. Used to "bleed" the air from the Hydraulic System, if necessary. Refer to
Troubleshooting
QuickJack™ Portable Car Jack
for more information.
19
P/N 5900263 — Rev. B1 — September 2021