VOLTCRAFT IPC-1 Notice D'emploi page 14

GB
BEFORE USING OUR BATTERY CHARGER, READ IN DETAILS ALL INSTRUCTIONS
CONTAINED IN THIS MANUAL. KEEP THIS MANUAL IN A SAFE PLACE AS YOU MAY
NEED TO USE IT AT A LATER DATE.
We draw the attention of all users of this device: please follow the safety and
maintenance instructions which are part of this manual. Also read the caution markings
on the charger, the manual, and the gift box.
INTRODUCTION:
Congratulations on purchasing this intelligent charging unit which enables definitely quick and
optimum charging to "AA" and "AAA" rechargeable batteries. With charging, discharging,
refreshing and capacity test functions as well as individual LCD displays for charging
compartments; this charging unit is reliable, user-friendly and ideal for use in the home, office
or on journey.
CAUTIONS:
1. The charger is restricted to charging NiCd and NiMH rechargeable batteries only. Never
adopt this charger to other types of batteries such as alkaline, lithium, carbon zinc or other
types that are not specified.
2. The charging unit shall only be used only at normal indoor room conditions.
3. Always follow the charging instructions for the rechargeable battery. Observe the
recommended charging current of the rechargeable batteries. Never adopt a charging
current higher than recommended in the charging process.
4. Never use any power cable and transformer other than those originally supplied with the
charging unit.
5. The rechargeable batteries may become hot during charging (especially when high
charging current is chosen). User shall take extra care when taking out the batteries after
charging.
6. Unplug the charging unit from the power source when not in use.
FEATURES:
Charging rechargeable battery in various current (200, 500, 700 or 1000 mA). The charging
current can be set up to 1500 or 1800 mAh when two batteries are charged.
Fast charging – 70 mins to charge up 2000 mAh batteries
Individual LCD display for compartments
Charging both "AA" and "AAA" rechargeable batteries simultaneously
Overheat detection to protect rechargeable batteries from over-charging
Minus delta voltage (-dV) detection for charge termination
Damaged batteries detection
Discharge mode (first discharging and then charging) to remove memory effect of
rechargeable batteries
Refreshing old rechargeable batteries by discharging/ charging cycles
Test function to check the capacities of rechargeable batteries
Charging/ Discharging functions can be launched independently and simultaneously to
each rechargeable battery in the compartments
Various display modes during charging/ discharging – the charging current (in mA), time
elapsed (in hh:mm), the terminal voltage (in V) and accumulated capacities (in mAh or Ah)
14
Instruction Manual