Safety Warnings - Tait T2030II Guide De L'utilisateur

WARNING
8
English

Safety Warnings

• Switch the radio off at petrol filling stations.
• Switch the radio off in the vicinity of explosive devices,
such as in a quarry that uses blasting techniques.
• Use of a handheld microphone or a radio while driving
could contravene the legislation that applies in your
country or state. Please check the vehicle regulations
in your own country.
EN60950 Compliance
This radio complies with the European Union standard
EN60950, when operated up to the rated 33% duty cycle of
two minutes transmit and four minutes receive, and at an
ambient temperature of 30°C or lower. Operation outside
these limits may cause the external temperature of the radio
to rise higher than specified by EN60950.
To ensure compliance with EN60950, the radio should be
mounted in such a position that will prevent the user from
coming into contact with the radio's heatsink.
FCC RF Exposure Limits
This product generates radio frequency energy during
transmissions. This device must be restricted to work-
related use in an occupational/controlled exposure
environment. The radio operator must have control of the
exposure conditions and duration of all persons exposed to
the antenna of this transmitter to satisfy FCC RF exposure
compliance.This device is not approved for general
population use.
The following conditions apply to the use of this radio:
• It must only be used with authorised accessories and
antennas.
• The operator must ensure that the minimum safe distance
of 0.9m (35 inches) between persons and the antenna is
not exceeded during transmissions.
• Do not exceed a duty cycle ratio of 50% transmit mode to
stand-by or receive modes. The radio is in transmit mode
when the PTT key on the microphone is pressed and the
TX indicator shows in the display window.