Télécharger Imprimer la page

Hendi 211403 Mode D'emploi page 9

Ballon de boisson chaude
Masquer les pouces Voir aussi pour 211403:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 16
This double walled hot drinks boiler saves up to 30% on energy costs compared to
traditional single walled hot drinks boilers.
Special safety precautions
 Always use the appliance with the lid ON.
Never carry the appliance by the lid.
Danger of burn by released steam when the lid will be lifted from the kettle.
Some parts of the appliance can become hot during use. Do not move or touch the appliance
when in operation.
Avoid boiling dry. This appliance is secured against boiling dry by an overheating protection. This
overheating protection turns off the appliance automatically. In that case, let the appliance cool
down completely before using it again. Adding water to a hot kettle is dangerous because sudden
steam can arise.
Preparations before using for the first time
Check to make sure the appliance is undamaged. In case of any damage, contact your supplier
immediately and do NOT use the appliance.
Remove all the packing material and protection film (if applicable).
Clean the appliance with lukewarm water and a soft cloth.
Place the appliance on a level and steady surface, unless mentioned otherwise.
Make sure there is enough clearance around the appliance for ventilation purposes.
Position the appliance in such a way that the plug is accessible at all times.
Before the first use we recommend you prepare the kettle by boiling water for about 10 minutes.
Let this water pour out the tap from the kettle.
Always fill this appliance with drinkable liquid.
Minimum filling volume is for the boiler 211403: 3 litres and for the boiler 211502: 4 litres.
Note: this appliance is not suitable for chocolate milk or soup.
Use
Make sure the tap is closed.
Fill the appliance with beverage up to the MAX level indicated on the glass tube.
Close the boiler with the lid.
Switch the appliance on by setting the switch to position 1. The green switch light will be on
(fig. 1).
Use the thermostat knob to select the desired temperature (maximum temperature setting is
110℃) The actual temperature can differ from the selected temperature.
When heating is in progress no light will be indicated (fig. 2).
When the beverage has reached the selected temperature, the green indication light will be
illuminated (fig. 2).
When cleaning and/or descaling is needed or the boiler is too hot, the orange light is on (fig.
2).
Fig. 1
Fig.2

Publicité

loading

Ce manuel est également adapté pour:

211502