Safety Symbols - sunjoe iON100V-10PS-CT Manuel D'utilisation

Safety Symbols

The following table depicts and describes safety symbols that may appear on this product. Read, understand and follow all
instructions on the machine before attempting to assemble and operate.
Symbols
READ THE OPERATOR'S
MANUAL(S) – Read, understand
and follow all instructions in the
user manual(s) before attempting
to assemble and operate.
SAFETY ALERT – Indicates
a precaution, a warning or
a danger.
Wear personal protective
equipment, including
close-fitting clothing.
Wear protective gloves and
non-slip footwear when
using the machine and
handling debris.
50 ft
WARNING! SHOCK HAZARD –
(15 m)
Keep at least 50 ft (15 m)
away from power lines. Do not
overreach. Keep proper footing
and balance at all times.
The rotating part will continuously
run for several seconds after you
turn off the machine.
Beware of flying objects
and debris.
Descriptions Symbols
Keep bystanders and children
a safe distance away.
WARNING! Do not expose the unit
to rain or wet conditions.
WEAR EYE AND HEARING
PROTECTION – For protection
against injury, wear ear defenders
and safety goggles.
DANGER! ROTATING
BLADES – Keep hands and
feet away from openings while the
saw is running.
CAUTION! Avoid contacting the
guide bar tip with any object. Tip
contact may cause the guide bar
to move suddenly upward and
backwards, which may cause
serious injury to the user.
Correct direction of cutting teeth.
Indoor use only. Only use battery
charger indoors.
7
Descriptions