Battery Charge Level Indicator; Attaching The Shoulder Strap - sunjoe iON100V-10PS-CT Manuel D'utilisation

1. Align and insert the extension pole into the coupler on the
rear pole assembly. Push hard until it is fully inserted into
position (Fig. 13).
Fig. 13
Rear pole assembly
2. Fix the pole assembly by fit in the coupler knob. Tighten it
securely (Fig. 14).
Fig. 14
Coupler knob
3. Follow the same instruction to fit the pole saw head
assembly into the extension pole.

Attaching the Shoulder Strap

1. If needed, attach the shoulder strap to the bracket on the
pole with the carabiner hook, as shown (Fig. 15).
Fig. 15
Bracket
2. Adjust the length of the strap to attain a comfortable
working position.
Battery Pack Operation
The equipment is powered by a lithium-ion battery (sold
separately). The battery pack is completely closed and
maintenance free.
Coupler Extension pole
Carabiner hook
TOOL ONLY
BATTERY + CHARGER SOLD SEPARATELY
In order to operate this pole chain saw, you will need
to additionally purchase either the iON100V-2.5AMP or
iON100V-5AMP lithium-ion battery and the 100V quick
charger (model iON100V-RCH). See page 23 for battery
options and specifications, or visit sunjoe.com.

Battery Charge Level Indicator

The battery pack is equipped with a push button for checking
the charge level. Simply press the push button to read off the
battery charge level from the LEDs of the battery indicator
(Fig. 16):
Fig. 16
Press
Charge level indicator push button
• All 4 level monitoring LEDs are lit: Battery charge level
is high.
• 3 level monitoring LEDs are lit: Battery charge level
is decreasing.
• 2 level monitoring LEDs are lit: Battery charge level is
decreasing. Stop work as soon as possible.
• 1 level monitoring LED is lit: Battery is flat. Stop work
IMMEDIATELY and charge the battery. Otherwise the
battery's service life will be greatly shortened.
12